Pennzoil
Pennzoil® Type F ATF
Pennzoil® Type F ATF is a specially compounded fluid for certain automatic transmissions and transaxles. It is formulated with high quality mineral oil and performance additives to exceed the requirements of Ford Motor Company specification WSS-M2C33-F.
Benefits:
Specially formulated for use in certain older Ford models and other vehicles. Recommended for use wherever Type F fluid is required, and also recommended for use in power-steering units of certain Ford models. Check owner’s manual for exact specifications.
- Meets or exceeds the requirements of Ford Motor Company specification WSS-M2C33-F.
- Recommended wherever “TYPE F” fluid is required.
- Maintains viscosity over a wide range of temperatures.
- Resistant to high temperature oxidation and fluid thickening.
- Helps prevent sludge and varnish on control valves.
- Provides wear protection for gears and bearings.
- Helps prevent rust on critical mating parts.
Compatible with commonly used seal materials.
Pennzoil® Synthetic Gear Oils
Pennzoil® Synthetic 75W-90 GL-4 and GL-5
Pennzoil® Synthetic Gear Oils are available in SAE 75W-90 viscosity grades of either API GL-4 or API GL-5 service classifications. Specially formulated with synthetic base stocks to meet the requirements that today’s cars, minivans, SUVs and light-duty trucks encounter in normal and severe driving conditions.
The synthetic base stocks used in Pennzoil® Synthetic gear lubricants provide better protection than low- and high temperature conventional mineral-oil base stocks. They offer protection over a wide temperature range. The API GL-5 product is specially suitable for use in limited-slip differentials.
Pennzoil® Synthetic 75W-140 GL-5
Pennzoil® Synthetic 75W-140 GL-5 Gear Lubricant combines a premium performance gear oil additive package with a high quality synthetic base stock. The result is a gear oil that provides excellent fluidity for safe lubrication of gears and axles during very low temperatures and also maintains a thick protective oil film during extremely hot
operating conditions.
Pennzoil® Synthetic 75W-140 GL-5 is formulated with all the performance additives necessary for outstanding protection of gears and bearings. It contains extreme pressure agents that protect against shock loading and wear. Foam inhibitors protect against oil aeration, which can rupture the lubricant film and cause wear due to lack of lubrication. Special rust inhibitors are incorporated into Pennzoil® Synthetic 75W-140 GL-5 to protect against corrosion that can result from condensation. Oxidation inhibitors are included to further enhance this synthetic oil's inherent oxidation stability, resulting in a lubricant with exceptionally long-service life and excellent resistance to deposit formation during high temperature operation.
Pennzoil® Synthetic 75W-140 GL-5 meets all the requirements of API Service
Classification GL-5.
Application:
Pennzoil® Synthetic 75W-140 GL-5 Gear Lubricant is designed primarily for the lubrication of differentials and manual transmissions requiring an API GL-5 gear lubricant. It can be used in limited slip and conventional differentials found in passenger cars, light trucks, sport utility vehicles and vans. It continues to flow at very low temperatures, providing especially good protection for gears and bearings in extreme cold weather. It also provides excellent service in torrid climates by not thinning at high temperatures, thereby maintaining a full film of protective lubricant on gear teeth. In hot running gear boxes, it allows longer service due to the excellent stability of the synthetic base stocks used in the product. Pennzoil® Synthetic 75W-140 GL-5 is specially formulated for today’s stringent demands of everyday stop-and-go driving and towing applications.
Pennzoil® Synthetic 75W-140 GL-5 is suitable for use in both limited slip and conventional differentials. It may be used for makeup or complete refill of limited slip differentials, including rebuilt units.
Passenger car or truck manual transmissions experiencing difficult shifting during cold weather while using conventional mineral-based GL-5 oils, will typically find easier shifting characteristics when using Pennzoil® Synthetic 75W-140 GL-5.
Benefits
- Contains special extreme pressure and anti-wear additives, minimizing wear that can occur with high or shock loads.
- Provides protection over a wide temperature range.
- Protects against corrosion.
- Provides outstanding thermal stability.
- Reduces or eliminates chatter in limited slip differentials.
Pennzoil® Synchromesh Manual Transmission Fluid
Pennzoil® Synchromesh Fluid is a synchromesh transmission fluid designed for certain manual transaxles and manual transmissions used by General Motors or Chrysler. Pennzoil® Synchromesh Fluid is formulated with high-quality paraffinic base stocks, a fluidity modifier, multifunctional performance additives, corrosion inhibitors, a foam suppressor and a shear stable viscosity index improver additive. It provides excellent oxidation stability, low-temperature performance, excellent synchronizer performance and compatibility with yellow metals, such as bronze, brass and copper components found in manual transaxles and transmissions. This product will satisfactorily lubricate General Motors or Chrysler manual transaxles and transmissions from -40°C to +150°C.
Benefits:
- Exhibits excellent low-temperature performance.
- Meets GM Specification 9985648 and Chrysler Specification MS-9224.
- Suitable for use in GM manual transaxles and transmissions requiring GM Part No. 12345349 or 12345577.
- Suitable for use in Chrysler transaxles and transmissions requiring Part No. 4874464.
- Excellent synchronizer performance.
- Excellent yellow metal compatibility.
Pennzoil® Multi-Vehicle ATF
Pennzoil® Multi-Vehicle ATF is a special blend of high-quality mineral base stocks with an advanced additive system for automatic and powershift transmissions. It meets the requirements of transmissions requiring DEXRON®-III, MERCON®, MERCON® V and Allison C-4 fluid. In addition, Pennzoil® Multi-Vehicle ATF is a Caterpillar TO-2 lubricant. Pennzoil® Multi-Vehicle ATF is formulated to provide protection that meets or exceeds the highest quality standards in the industry.
Pennzoil® MULTI-VEHICLE ATF is suitable for use in applications requiring:
- DEXRON®, DEXRON®-II, DEXRON®-III.
- MERCON®, MERCON®V.
- Allison C-4.
- Toyota T, T-III, T-IV.
- Honda Premium Formula ATF, ATF-Z1 (except in CVTs).
- Mitsubishi/Kia/Hyundai SP, SP-II, SP-III.
- Nissan Matic -D, Nissan Matic-J.
- BMW LA2634, LT71141.
Not for use in vehicles requiring Type F, DEXRON®-VI, MERCON® SP, Full Synthetic MERCON®, Nissan Matic K, Toyota/Lexus WS, Mercedes Benz 3403-M115, BMW 1375.4, or Volvo 1161540-8. Also not for use for CVT. Check owner's manual and/or dipstick for
exact specification.
Benefits:
Pennzoil® Multi-Vehicle Automatic Transmission Fluid is suitable for use in most modern vehicles. Pennzoil® Multi-Vehicle Automatic Transmission Fluid is a high-quality, advanced technology formulation that provides:
- Excellent high-temperature oxidation protection.
- Anti-shudder protection.
- Outstanding low-temperature protection.
- Smooth, consistent shifting.
Pennzoil® MERCON® V ATF
Pennzoil® MERCON® V ATF is specially formulated for Ford automatic transmissions where a Ford MERCON® V fluid is recommended. MERCON® V fluids are typically recommended for Ford automatic transmissions beginning with the 1997 model year. Pennzoil MERCON® V ATF is also suitable for use in those Ford automatic transmissions that require the use of a MERCON® fluid or other transmissions that require the use of a former type
DEXRON®-III fluid.
Pennzoil MERCON® V ATF is a high viscosity index product and offers good oxidation stability, corrosion prevention, foam resistance, and controlled frictional properties. This fluid also provides good seal compatibility, good wear protection and smoother shifting.
Pennzoil® Long-Life® Transmission Fluid
Pennzoil® Long-Life® Transmission Fluid TO-4 is suitable for the lubrication of heavy duty equipment in on- and off-road service that requires a lubricant meeting the Caterpillar TO-4 or Allison C-4 specifications. Provides excellent service in most Caterpillar powershift transmissions, final drives, hydrostatic transmissions, torque converters and hydraulics specifying Caterpillar TO-4 qualified oils, as well as transmissions and drive trains recommending Allison C-4 oils.
Pennzoil® Long-Life® Transmission Fluid EW SAE 50 is formulated with non-EP gear additive technology and synthetic base stocks. It is suitable for the lubrication of manual transmissions in on-road trucks and buses operating on extended warranties with oil drains up to 500,000 miles. It meets the stringent requirements of Eaton PS-164 Rev. 7 and is also suitable for use in manual transmissions of off-highway heavy equipment that requires an oil meeting API GL-1 service classification.
Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oil
Today’s heavy duty trucks, construction, and farm equipment place high demands on gear lubricants used in transmissions and axles. Longer working hours, higher horsepower engines and aerodynamically styled tractors, which reduce airflow for cooling, cause transmissions to operate at higher temperatures. Heavier loads and higher speeds place increasing demands on gear oils to protect against wear and shock loading which can damage bearings, gears, and differentials in axles. Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils exceed the latest requirements of commercial equipment manufacturers who require API GL-5, API MT-1, and/or Mack GO-J quality lubricants in their equipment.
Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils are formulated for use in universal duty hypoid or spiral bevel gear differentials or axles in heavy duty truck, agricultural or construction equipment. They may also be used in heavy duty truck or bus manual transmissions that allow the use of API MT-1 lubricants. Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils are blended with new thermally stable sulfur-phosphorus additive technology that provides the latest in “Clean Gear” performance (MT-1). Clean Gear performance can help reduce loss of lubricant due to seal degradation as the gear oils are less likely to form harmful deposits that can degrade seals.
Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils are formulated with all the performance additives necessary for outstanding protection of gears and bearings. Thermally stable extreme pressure agents protect against shock loading and wear, even when contaminated with water, which can happen in construction or agricultural applications. Foam inhibitors protect against oil aeration, which can rupture the lubricant film and cause wear due to lack of lubrication. Special rust inhibitors are used to protect against corrosion that can result from condensation. Oxidation inhibitors are included to enhance the excellent oxidation stability of the high quality, high viscosity index paraffinic base stocks used in the products.
Although Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils are classified as multi-viscosity gear oils, they do not contain viscosity index improvers that artificially boost viscosity. This means that the lubricants will retain their “body” and will not shear down during use, maintaining a strong, stable, protective film, even under heavy loads and high speeds. Pennzoil® Long-Life® Heavy Duty Gear Oil 80W-90 gives the full protection of SAE 90 under high temperatures and hard driving conditions, while still providing the fast-flow characteristics of SAE 80W when cold. Similarly, the Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oil SAE 85W-140 gives the full protection of SAE 140 under high temperatures and loads while providing the fast-flow characteristics of an SAE 85W. Both products offer maximum lubrication and gear protection over a wide temperature range.
Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils are compatible with other gear oils under a wide range of operating and storage conditions.
Application:
Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils are recommended for use in hypoid or spiral bevel gear axles of trucks, buses, construction or agricultural equipment where API Service GL-5 product is specified. They are also recommended for use in heavy duty truck or bus transmissions that require an MT-1 lubricant.
Examples of agricultural equipment which might use Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils include final drives, wheel hubs, front axles and wheel ends of tractors; transmissions in skid steers; gear reduction units in balers; feeder and lower unloader gear cases in combines. Examples of agricultural equipment which might use Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils include final drives and winches in crawler tractors or excavators; transmissions in forklifts; rear axles in tree skidders; front and rear axles in trenchers; final drives in wheel loaders. You should consult the equipment manufacturer for exact fluid recommendations; the specified fluid for the application might be different than one of the examples. Fluid recommendations can and do change, depending on model
and manufacturer.
Suitable for mixed fleet applications, Pennzoil® Long-Life® GearPlus Heavy Duty Gear Oils are also recommended for use in limited slip differentials of cars, pickup trucks, and sport utility vehicles, in addition to construction and agricultural equipment. These gear oils are designed to reduce or eliminate chatter that can occur in these types of differentials, and can be used as makeup or refill fluid, or in rebuilt units.
Benefits:
- Combats rust, corrosion and wear for long equipment life.
- Resists formation of deposits for improved seal life.
- Inhibits oil oxidation.
- Helps eliminate wear due to aeration by preventing the formation of foam.
- Good compatibility with other gear oils facilitates lubricant top-off and changeovers.
- Suitable for mixed fleets.
Pennzoil® Long-Life® Extended Warranty Gear Oil
The trucking industry is a vastly different business than it was a generation ago. Customers demand just-in-time deliveries to keep their factories running and their stores stocked. Trucks are bigger and operate under heavier load conditions. Streamlined truck designs allow for less airflow and higher operating temperatures in the axles. Conditions are tough in the trucking industry—and it’s a business that can never afford to stop, especially on the side of the road waiting for your truck axle to be repaired because your gear oil couldn’t stand up to the test. That’s why we formulated Pennzoil® Long-Life® Extended Warranty Gear Oils—the axle lubricants tough enough for your truck.
Just as the trucking industry has changed, gear lubricants have changed. Pennzoil® Long-Life® Extended Warranty Gear Oils are formulated with state-of-the-art performance additives to meet today’s challenges of heavier loads, higher temperatures and extended drain intervals. These lubricants have earned Dana Corporation’s SHAES-256 Rev. C approval for extended warranty drive axles operating on 500,000-miles drains and 750,000-mile extended warranty. As such, they will be found on the list of SHAES-256 Rev. C “Approved Lubricants for Extended Warranties,” providing protection under the Roadranger® 750,000-mile extended warranty program with 500,000-mile oil drain intervals. Pennzoil® Long-Life® Extended Warranty Gear Oils have also received approval under the ArvinMeritor (formerly Rockwell) O76-N “Extended Drain Hypoid Lubricants” specification, allowing their use at 500,000-mile drain intervals in ArvinMeritor truck axles equipped with pump and filtration systems. Pennzoil® Long-Life® Extended Warranty Gear Oils have also received Mack Trucks, Inc. GO-J and MIL-PRF-2105E approvals.
The additive technology in Pennzoil® Long-Life® Extended Warranty Gear Oils provides outstanding protection of gears, bearings and differentials in heavy duty axles from damage due to wear and shock loading. It is especially good at resisting spalling. The frictional properties of Pennzoil® Long-Life® Extended Warranty Gear Oils provide for excellent power divider operation for optimum wheel performance—a feature that is especially important in heavy duty off-road axle operation. And the additives in Pennzoil® Long-Life® Extended Warranty Gear Oils are highly stable, will not separate, and maintain their effectiveness in the presence of heat, as well as when exposed to water from rain, snow or truck washes.
Pennzoil® Long-Life® Extended Warranty Gear Oils are specially engineered to deliver outstanding cold-weather performance. This feature helps guard against wear during cold-temperature start-ups. Pennzoil® Long-Life® Extended Warranty Gear Oils effectively inhibit oxidation and resist the effects of heat. They meet API MT-1 requirements and provide the latest in “Clean Gear” performance. These attributes help reduce the loss of lubricant due to seal degradation, as these gear oils are less likely to form harmful, abrasive deposits.
Application:
Pennzoil® Long-Life® Extended Warranty Gear Oils are formulated for use in universal duty hypoid or spiral bevel gear truck differentials of over-the-road truck fleets, as well as in off-road vehicle axles. These lubricants exceed all performance requirements of Dana SHAES-256 REV. C, ArvinMeritor O76-N, Mack GO-J Plus, API GL-5, MT-1 and MIL-PRF-2105E/SAE J2360 specifications. Pennzoil® Long-Life® Extended Warranty Gear Oils can be used in Dana® Spicer® drive axles for extended drain intervals of 500,000 miles and satisfy the requirements of the 750,000-mile warranty. In ArvinMeritor axles equipped with pumps and filter for extended drain intervals of 500,000 miles, and in Mack axles operating on extended drain intervals.
Pennzoil® Long-Life® Extended Warranty Gear Oils are available in SAE grades 75W-90 and 80W-140 and can be used wherever an API GL-5 SAE grade 75W-90, 80W-140, 75W, 80W, 90 or 140 gear lube is recommended.
It is worth noting that Eaton and ZFMeritor do not allow the use of API GL-5, MT-1 gear oils in their heavy duty transmissions. It should also be noted that most axle oils are not compatible with transmission fluids. Mixing of the two lubricants should be avoided as it may result in incompatibility and additive separation.
Benefits:
- Meets Dana SHAES-256 Rev. C specification, for use at 500,000-mile oil drain interval and meets the warranty requirement for 750,000 miles.
- Meets ArvinMeritor (formerly Rockwell) O76-Q specification, for use at 500,000-mile drain intervals.
- Mack Trucks, Inc. GO-J Plus approved.
- U.S. Military specification MIL-PRF-2105E/SAE J2360 approved.
- Meets API GL-5 &MT-1 specifications.
- Outstanding protection against wear.
- Extreme low-temperature performance.
- Can be used as a top-off in synthetic factory filled equipment.
- Resists deposit formation to protect seals from premature degradation and subsequent lubricant loss.
- Inhibits oil oxidation for clean operation and long lubricant life.
- No additive fallout in the event of water contamination.
- Provides outstanding anti-foam protection.
- Combats rust and corrosion.
Pennzoil® GearPlus® SAE 80W-90 GL-4 and GL-5
Pennzoil® Gearplus® SAE 80W-90 GL-4 is formulated to meet the unique requirements of transmissions and differentials requiring an API GL-4 performance product.
Provides the full protection of SAE 90 viscosity grade under hard-driving conditions, while providing the low-temperature flow characteristics of SAE 80W viscosity grade necessary during cold-weather start-ups.
Pennzoil® Gearplus® SAE 80W-90 GL-5
Pennzoil® Gearplus® SAE 80W-90 GL-5 is a specially formulated gear oil designed to withstand the demands of today's stop-and-go driving. Recommended by Pennzoil® for use in hypoid or spiral bevel gear differentials and industrial gear units where API Service GL-5 and SAE 80W or 80W-90 viscosity grades are specified. Especially suited for limited-slip differentials as make-up or refill fluid, and is an excellent replacement fluid for rebuilt limited-slip.
Pennzoil® Gearplus® SAE 80W-140 GL-5
Pennzoil® Gearplus® SAE 80W-140 GL-5 multi-purpose gear lubricant is manufactured from select, highly refined base oils and field-proven performance additives. This gear oil offers excellent chemical and thermal stability over a wide temperature range, and optimum protection against wear and shock loads in transmissions and axles.
Benefits:
Provides excellent performance in modern, heavy-duty differentials and manual transmissions in passenger cars, trucks and contractor equipment that require extreme pressure lubricants.
- Meets API GL-5 and MT-1.
- Proven gear protection in low- and high-speed conditions.
- Good low-temperature starting.
- Excellent performance in severe service.